OpERAtIng InstRuCtIOns
MAnUAL WIndInG
Crown in position A.
If the watch has not been worn for
several days, wind it up manually
with 20 careful clockwise turns of the
crown.
Once you have done so, the watch
will wind itself up automatically with
your wrist movements.
CALIBER 288
Position A
18
CALIBER 288
sETTInG THE TIME
Pull the crown out to position C.
Turn the hands clockwise until the date
changes (midnight). Continue to turn the
hands until the right time is reached,
then, in synchronization with a time
signal or against a reference clock, push
the crown back to position A.
Position C
Important: If you attempt to set the
time while the watch's chronograph is
Position A
running, the chronograph's minutes hand
will move as you set the time and this
will distort the chronograph's minute
count.
OpERAtIng InstRuCtIOns
19