Remove The Back Cover - Motorola moto g User Manual

Start
let's get up & running
Start

Remove the back cover

Put in the cards & power on
Battery life
Sign in
Menu More
Back Next
Remove the back cover
Your phone is water resistant, but it depends on you putting the
cover on properly. If you need to remove the cover to insert
cards, be sure to replace it properly to ensure water resistance.
Take off the back cover.
Put your finger in the bottom corner hole in the cover and
pry it off. Don't be afraid to use a little muscle.
Put on the back cover.
Press all the way around the camera area and the
cover's edges for a water-resistant seal.
Caution: Don't use tools to remove the cover—doing so may
damage your phone.
Water resistance note: This device is IPX7 water
resistant—not waterproof. Avoid prolonged exposure to
water. Do not submerge in more than three feet of water or
for longer than 30 minutes.