Hardware Requirements For A Category 2 Server - Mitel SME Server V5 with ServiceLink User Manual

Chapter 5. Hardware Requirements of the SME Server V5 with ServiceLink Host Computer
Table 5-2. Hardware Requirements for a Category 1 Server
Architecture
Processor speed
Minimum RAM
Hard drive
SCSI adapter
Ethernet adapters
Modem (for dialup only)
CD-ROM drive
Floppy drive
Monitor
Graphics card
Mouse
Sound card

5.2. Hardware Requirements for a Category 2 Server

Table 5-3. Definition of a Category 2 Server
# of Users
Usage
Table 5-4. Hardware Requirements for a Category 2 Server
Architecture
Processor speed
Minimum RAM
Hard drive
SCSI adapter
Ethernet adapters
Modem (for dialup only)
24
PCI-based Pentium-class processor
90 MHz (or better)
32 MB (64 MB recommended)
IDE or SCSI - at least 1 GB
SCSI adapter must appear on the supported list (only necessary for SCSI systems)
The ethernet adapters installed on your server must appear on the supported list.
Only modems that are Linux-compatible may be used. WinModems are not supported.
ATAPI or SCSI
any
any
any
none required
none required
Up to 40
Light (moderate use of remote access, file sharing and other disk-intensive activity)
PCI-based Pentium-class processor
400 MHz (or better)
128 MB
IDE or SCSI - at least 6 GB
SCSI adapter must appear on the supported list (only necessary for SCSI systems)
The ethernet adapters installed on your server must appear on the supported list.
Only modems that are Linux-compatible may be used. WinModems are not supported.