LG 42LG710H Owner's Manual page 107

Installer Menu Items 035 through 1 19
Menu Item Function
035 COMPPORT EN.
038 YPrPb EN.
039 REAR AUX EN
040 AUTO CAMPORT
046 STRT AUX SRCE
047 AUX STATUS
053 DIS. CH-TIME M.
069 EN. CH-T COL.
070 FOR. CH-TIME
071 BCK. CH-TIME
073 CH NOT AVBLE
075 REVERT CH
078 UPN MSB
079 UPN MSB-1
080 UPN MSB-2
081 UPN LSB
082 CHKSM ERROR
083 HANDSHK TIME
084 PERMANENT BLK
087 REAL BGB EN.
088 EN NOISE MUTE
090 KEY LOCK
091 YPrPb2
093 RJP AVAILABLE
094 SAP MENU EN
096 DEF. ASP . RATIO
099 BACK LIGHTING
102 ATSC BAND
103 ATSC TUNE MODE
104 START MINOR CH
106 ASP RATIO LOCK
1 16 VIDEO MUTE EN
1 17 FACT DEFAULT
1 18 POWER SAVING
1 19 DATA CHANNEL
N N o o t t e e 1 1 : Dependent on item 093 RJP Available setting.
Value Range Default Value
0 / 1 1
0 / 1 1
0 / 1 1
0 / 1 1
1 6, 255 6
~
0 / 1 0
0 / 1 0
0 / 1 1
0 7 2
~
0 7 2
~
0 / 1 0
displayed when directly accessing a channel not in the favorite channel list.
0 / 1 0 If set to 1 and loss of M.P .I. communication occurs, TV tunes to Start Channel.
0 255 0
~
0 255 0
~
0 255 0
~
0 255 0
~
0 / 1 1
0 5 5
~
0 / 1 0
0 / 2 / 18 (For LG710H) 2 (For LG710H)
0 / 1 / 17 (For LD650H, 1 (For LD650H,
LD655H) LD655H)
0 / 1 1
0 / 1 0
0 / 1 1
0, 1, 2, 5, 6 0
0 / 1 1 Set to 0 to disable feature on Function menu. Set to 1 to enable feature
0 4 2
~
1 100
~
101 200 202
~
201, 202, 255
0 4 4
~
0 / 1 1 Default 01 for physical channel scan. Set to 0 for Virtual Channel scan.
0 255 0
~
0 / 1 0
0 / 1 0
0 / 1 0
1, 3, 7 3
0 135 0
~
Brief Description of Function and Comments
Note 1. Set to 0 to disable HDMI 1. Set to 1 to enable HDMI 1.
Set to 1 to enable display panel Component Video 1 input jacks.
Set to 1 to enable display panel Video 1 input jack.
Set to 1 to automatically switch to Camport. If set to 1, STRT AUX
SRCE cannot be set to 2.
Sets the starting AUX source.
Set to 1 for M.P .I. AUX source to be reported as a channel number
instead of Channel 0.
Set to 1 to disable Channel-Time display.
Set to 1 to enable custom color for the Channel-Time display.
Chooses custom foreground color for the Channel-Time display.
Chooses custom background color for the Channel-Time display.
If set to 1 and channel override is 0, "NOT AVAILABLE" message is
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
Enforces rigid M.P .I. checksum.
Relaxes M.P .I. timing to be compatible with PC based
Windows-controlled systems.
Removes block hours setting for Parental Control and makes block
permanent.
Note 1. Set to 0 to disable RGB1. Set to 2 for PC.
Note 1. Set to 0 to disable RGB. Set to 1 to enable RGB.
If set to 1, mutes audio if no signal is present.
If set to 1, keyboard is locked out, IR is still functional.
Set to 0 to disable HDMI 2. Set to 1 to enable HDMI 2.
Set to 0 to disable. Set to 1, 2, 5 or 6 for HDMI or DVI mode. (See
detailed descriptions)
on Function menu.
Sets default aspect ratio at power up. See detailed descriptions
and item 106.
Sets the brilliance of the TV picture backlighting.
Settings above 101 control dynamic back lighting and enable
power saving mode.
Selects ATSC band.
Selects Minor start channel. Set 0 for NTSC. Not 0, sets Minor
channel number.
To retain set aspect ratio on power cycle, set to 1. Set to 0 for
default ratio on power cycle.
Set to 0 for normal, set to 1 for Blank.
0=Normal. 1=Loads presets of all above settings.
Set to 1 to be powered at b-Lan module. Set to 3 to bo
powered at b-Lan module only when TV is powered
on. Set to 7 to be not powered at b-Lan module.
Sets the DATA Channel.
107