Before Use; Unpacking; Assembly; Operation - Dirt Devil M7004 Operating Manual

3 Before use

3.1 Unpacking

3 Before use
ATTENTION:
Always transport or ship the appliance in its original packaging to avoid
damage. Keep the packaging for such an event. However, dispose of
no-longer-needed packaging material properly.

3.2 Assembly

2
A B
3
2
1
4
1 2
5
*optional (*i. e. in the scope of delivery depending on model and features)
18
click! click! click!
C
*
*
3
3
1. Unpack the appliance and all its accessories.
2. Check that the contents are intact (Fig. 1).
NOTE:
Immediately contact your dealer if you have found damage resulting
from transport.
B
WARNING:
Danger of injury! Only attach nozzles when the vacuum cleaner is not
connectedto the mains. The cylinder vacuum cleaner could be switched
on by accident.
ATTENTION:
Before vacuuming, make sure that the fitted nozzle suits the surface to
be cleaned. Also observe the flooring manufacturer's recommendations.
1. Insert the suction hose adapter powerfully into the suction hose recep-
tacle (Fig. 2/A). Press until you first hear and feel the release buttons
on the adapter snap into place (Fig. 2/B) and the adapter can then be
inserted no further.
2. Insert the handle into the upper end of the telescopic tube (Fig. 3/A).
3. Adjust the length of the telescopic tube (Fig. 3/B). Press down the re-
lease latch on the tube to do this (Fig. 3/B). Then extend the telescopic
tube to the desired length. Let go of the release catch while pulling until
it locks in place. You will hear a distinct click.
4. Push the accessory holder onto the telescopic tube (Fig. 3/C).
5. Select the nozzle according to the surface to be cleaned:
The following are included in the scope of delivery:
- Floor nozzle (Fig. 4/1):
It can be used everywhere and, thanks to its switch, can be used
equally well on carpets and hard floors.
- Crevice nozzle (Fig. 5/1):
Use this to vacuum dust from hard to reach places.
- Upholstery nozzle (Fig. 5/2):
Use this to vacuum up dust off upholstery.
- Furniture brush (Fig. 5/3):
Use this to vacuum dust off objects that have sensitive surfaces.
*Optionally available (i. e. included in the scope of delivery depending
on model and features) are also:
- Parquet brush (Fig. 4/2*):
Its long bristles make it especially suitable for cleaning delicate sur-
faces (e. g. parquet and laminate floors).
- Turbo brush (Fig. 4/3*):
Is used to vacuum non-sensitive carpets, runners, mats, and the like.
- Mini turbo brush (Fig. 5/4*):
Is used to vacuum non-sensitive upholstery, runners, mats, and the
like.
ATTENTION:
Our (mini) turbo brush can only be used to vacuum surfaces that
are not sensitive. Do not clean any floors or objects with the (mini)
turbo brush that you would not clean without a second thought with a
conventional brush. Therefore, do not clean sensitive or polished floor
surfaces with the (mini) turbo brush. Nor should you clean furniture, sen-
sitive carpets, upholstery, covers, or any material with a sensitive texture
with the (mini) turbo brush. If in doubt, refrain from using the (mini) turbo
brush. In every instance, comply with the instructions for care and clean-
ing provided by the respective manufacturer.
6. Push the nozzle chosen onto the lower end of the telescopic tube
(Fig. 4). You can also put the small nozzles directly on the handle
*
(Fig. 5).
4
7. Keep the other nozzles safe and inaccessible to children.
4

Operation