Table of Contents
Advertisement
3.3 Powering On/Off the Mobile Phone
Hold the End key for a while to power on the mobile phone. A power-on
animation appears on the display screen.
Input the phone lock code and press the OK key if the mobile phone prompts you to
input the phone lock code. The original code is 0000.
Input the PIN and press the OK key if the mobile phone prompts you to input the PIN.
The PIN is provided by the network operator for new opening SIM card.
To power off the mobile phone, hold the End key for a while.
3.3
Linking to the Network
After the SIM card and the mobile phone are successfully unlocked, the mobile
phone automatically searches for an available network.
3.4 Dialing Calls
In the standby interface, press number keys to input the area code and the
telephone number, and then press the Dial key to dial a call. To end the call, press the
End key.
Dialing an international call
Hold the * key and input "+". Then input the country code, the area code and
the telephone number. Finally, press the Dial key.
Dialing a call to a number in the phonebook
Enter the phonebook and use the up or down direction keys to find the
telephone number you want to call.
Press the Dial key. The mobile phone automatically dials the chosen telephone
number.
Redialing the last number
In the standby interface, press the dial key to show the dialed calls.
Press the up or down direction keys to select a number you want to dial and then
press the Dial key.
Answering incoming calls
Press the Dial key or the Left soft key to answer an incoming call.
Press the End key to end the current conversation.
To reject an incoming call, press the End key or the Right soft key.
Using options during a conversation
Select Options during a conversation to pause, end the ongoing call, originate a
new call, browse the phonebook, view information, set the mute, set the DTMF, or
perform other operations. For details, refer to the menu guide.
4. Input methods
This mobile phone provides multiple input methods, including English input in both
upper and lower case, and numeric input method.
1) Press # key to switch between input methods.
2) Press the * key to enter the Select symbol interface and select a symbol you
want.
Advertisement
Table of Contents
