MIC: connect to MIC
DC12V: connect to power supply
LAN: network port (some models support PoE power supply)
- Focus Adjustment
Step 1: Remove the sun shade and lens case from the device as shown above.
Step 2: Loosen the screws of the lens for focusing. Then rotate the lens left or right to adjust the focus.
Focus: Rotate left or right to adjust definition of the image.
Zoom: Rotate left or right to zoom in or out the image.
1
Installation
1.1
Install IP-CAM to Ethernet Network
The connection of digital video server is show below.
Please connect the PC and IP-CAMERA in accordance with the above picture.
The connection steps are shown as below:
Step 1: Connect the monitor, microphone and network to the device.
Step 2: Connect the power supply.
Step 3: Install the device.
4
Focus
Zoom
Figure 2-1 Connection
EN