Management; Settings - Backup - Iskratel Innbox V50-U Management Manual

64

Ethernet Connection
• Pass: indicates that the Ethernet interface from your computer is connected to the LAN port of
your device. A flashing or solid green LAN LED on the device also signifies that an Ethernet
connection is present and that this test is successful.
• Fail: Indicates that the device does not detect the Ethernet interface on your computer.

USB Connection
• Pass: Indicates that the USB interface from your computer is connected to device properly.
• Down: Indicates that the device does not detect the signal from USB interface.

Wireless Connection
• Pass: Indicates that the Wireless interface from your computer is connected to the wireless
network.
• Down: Indicates that the device does not detect the wireless network.

DSL Synchronization
• Pass: Indicates that the device has detected an DSL signal from the telephone company. A solid
WAN LED on the device also indicates the detection of an DSL signal from the telephone
company.
• Fail: Indicates that the device does not detect a signal from the telephone company's DSL
network. The WAN LED will continue to flash green.
3.6

Management

3.6.1

Settings - Backup

You can save the current configuration of your device to a file on your computer. This is highly
recommended before you change any configuration settings or before you upgrade the firmware.
Select Management > Settings > Backup. The following page opens:

Backup Settings: Click this button to save the device configurations to a file on your PC.
Figure 3-80: Backup Settings
D. Management guide