Sip Debug Settings - Iskratel Innbox V50-U Management Manual

62

DND: Select the checkbox to enable this option.

Enable T38 support: Enable or disable T.38 Fax mode support with this checkbox. You can plug a fax
machine into either phone port to send or receive faxes. Functionality depends upon FAX support by
your VoIP service provider.

Dtmf Relay setting: Set the special use of RTP packets to transmit digit events.

SIP Transport protocol: Set the special use of SIP protocol to transmit digit events.

Enable SIP tag matching: Select if required by your VoIP provider. (e.g. disable with Vonage service)

Music Server: Enter the Music Server IP address.

Music Server port: Enter the Music Server port.

Start SIP client: Click to start the SIP client.

Stop SIP client: Click to stop the SIP client.

Apply: Click to confirm the setting.
3.4.3

SIP Debug Settings

Select Voice > SIP Debug Settings. The following page opens:
Figure 3-77: SIP debug settings - Global parameters tab

Vodsl Console Log Level: From drop-down list you can select select the following:
•
Error
•
Notice
•
Debug

Start SIP client: Click to start the SIP client.

Stop SIP client: Click to stop the SIP client.

Apply: Click to confirm the setting.
D. Management guide