Wireless Bridge - Iskratel Innbox V50-U Management Manual

Wireless Bridge

3.3.4 Wireless Bridge
The device can also be configured as a wireless bridge. The wireless bridge mode will turn the access
point into a wireless bridge. Wireless clients will not be able to connect to the access point in this mode.
Select Wireless > Wireless Bridge. The following page opens:

AP Mode: Select the AP mode from the drop-down list:
• Access Point: Select this option to allow wireless stations including AP clients to access.
• Wireless Bridge: Or WDS (Wireless Distribution System). It bridges the wireless stations, also in
bridge mode, to connect two or more remote LANs.

Bridge Restrict:
• Disabled: Select this option to disable wireless bridge restriction. Any wireless bridge will be
granted access.
• Enabled: Select this option to enable wireless bridge restriction. Enter the MAC address of the
Remote Bridges. Only these remote bridges are granted access.
• Enabled (Scan): Select this option to enable wireless bridge restriction, and it will scan the
environment for APs that exist around the device. Only those selected AP will be granted access.

Refresh: Click this button to update the remote bridges.

Apply/Save: Click this button to save the settings.
Figure 3-70: Wireless Bridge
55