Wps Setup - Iskratel Innbox V50-U Management Manual

WPS Setup

3.3.2.2 WPS Setup
Wi-Fi protected setup (WPS) is a standard for easy and secure establishment of a wireless home network.
The goal of the standard is to simplify the process of configuring security on wireless networks.The Innbox
V50-U home gateway supports two different ways of adding a device to the wireless network:

PIN Method - a PIN (Personal Identification Number) has to be read from either a sticker on the new
wireless client device (STA) or a display, if there is one, and entered at the "representant" of the
Network.

Push-Button Method - user simply has to push a button, either an actual or virtual one, on both the
AP (or a Registrar of the Network) and the new wireless client device.
• Enabled: Select this option to enable wireless bridge restriction. Enter the MAC address of the
Remote Bridges. Only these remote bridges are granted access.
• Enabled (Scan): Select this option to enable wireless bridge restriction, and it will scan the
environment for APs that exist around the device. Only those selected AP will be granted access.

Refresh: Click this button to update the remote bridges.

Apply/Save: Click this button to save the settings.
Figure 3-67: Wireless Security Configuration - WPS
53