Wpa2 - Iskratel Innbox V50-U Management Manual

WPA2

3.3.2.1.4 WPA2
To configure WPA2 settings, select the WPA2 option from the drop-down list. The menu will change to
offer the appropriate settings. The steps of these settings are similar to WPA settings.

WPA2 Preauthentication: Select Enable from the drop-down list. Stations will authenticate with the
AP during the scanning process, and once association is required, the station has been already
authenticated.

Network Re-auth Interval: Enter a value in seconds as the frequency interval to enable periodic
Network Re-authentication function, while leave it blank or enter "0" to disable it.
Figure 3-63: Manual Setup AP - WPA2
49