Wireless; Basic - Iskratel Innbox V50-U Management Manual

42
3.3

Wireless

Select Wireless. Click any of the submenus to configure the corresponding function of the wireless
network: Basic, Security, MAC Filter, Wireless Bridge, Advanced and Station Info.
3.3.1

Basic

Select Wireless > Basic. The following page opens:

Enable Wireless: Enable or disable wireless connection.

Hide Access Point: Check this box if you want to hide any access point for your device, so a station
cannot obtain the SSID through passive scanning.

Clients Isolation: When many clients connect to the same access point, they can access each other.
Check this box to disable the access among clients which connect to the same access point.

Disable WMM Advertise: WMM (wi-fi multimedia) provides high-performance multimedia voice and
video data transfers. Select the checkbox to disable WMM.

SSID: The SSID (Service Set Identification) is the unique name shared among all devices in a wireless
network. The SSID must be identical for all devices in the wireless network.

Country: The channel will adjust according to nations to adapt to each nation's frequency provision.

Max Clients: Specifies maximum wireless client stations to connect to access point. Once the clients
exceed the max value, all other clients are refused. The maximum value is 16.

Wireless - Guest/Virtual Access Points: If you want to make Guest/Virtual network function
available, check the Enabled box in the table of access points.

Apply/Save: Save the current settings.
Figure 3-55: Wireless - Basic
D. Management guide