Interface Grouping Configuration - Iskratel Innbox V50-U Management Manual

Interface Grouping Configuration

3.2.13.1 Interface Grouping Configuration
1. Select Advanced Setup > Interface Grouping > Add. The following page opens:
2. Enter a unique name for Group Name.
3. Select the interface which you want to use from the drop-down list.
Note: If you want to automatically add LAN clients to a WAN Interface in the new group,
add the DHCP vendor ID string. By configuring a DHCP vendor ID string any DHCP
client request with the specified vendor ID (DHCP option 60) will be denied an IP
address from the local DHCP server.
4. Select interfaces from the available interface list and add it to the grouped interface list using the arrow
buttons to create the required mapping of the ports.
Note: These clients may obtain public IP addresses.
5. Click Save/Apply to make the entry effective immediately.
Note: If a vendor ID is configured for a specific client device, REBOOT the client device
attached to the modem to allow it to obtain an appropriate IP address.
Figure 3-51: Interface Grouping Configuration
39