Upnp - Iskratel Innbox V50-U Management Manual

UPnP


Apply: Save the settings.

Tone Selection: Click this button to open the Tone settings page:
The frequency band of DSL is split into 256 separate tones, each spaced 4.3125 kHz apart. Each tone
carries separate data, so the device operates as if 256 separate devices were running in parallel. The tone
range is from 0 to 31 for upstream and from 32 to 255 for downstream. Do not change these settings
unless directed by your ISP.
3.2.11 UPnP
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple
peer-to-peer network connectivity between devices. An UPnP device can dynamically join a network,
obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a
device can leave a network smoothly and automatically when it is no longer in use. UPnP broadcasts are
only allowed on the LAN.
Select Advanced Setup > UPnP. The following page opens:

Enable UPnP: Select the checkbox to enable UPnP.

Apply/Save: Save the settings.
Figure 3-47: DSL Tone Settings
Figure 3-48: UPnP Configuration
37