Default Gateway; Static Route - Iskratel Innbox V50-U Management Manual

30
3.2.8.1

Default Gateway

Default gateway interface list can have multiple WAN interfaces served as system default gateways but
only one will be used according to the priority with the first being the highest and the last one the lowest
priority if the WAN interface is connected. Priority order can be changed by removing all and adding them
back in again.
Select Advanced Setup > Routing > Default Gateway. The following page opens:

Selected Default Gateway Interfaces: A list of selected default gateway interfaces.

Available Routed WAN Interfaces: A list of available routed WAN interfaces.

Apply/Save: Click this button to save the settings.
3.2.8.2

Static Route

Configure the static routes - a pre-determined path that network information must travel to reach a specific
host or network.
Select Advanced Setup > Routing > Static Route. The following page opens:

Add: Click this button to add a static route.

Remove: Click this button to remove a static route.
Figure 3-36: Routing - Default Gateway
Figure 3-37: Routing - Static Route
D. Management guide