Barco CS-100 Installation Manual page 36

6. CS-100 Configurator
If you cannot find the IP address (e.g. there is no screen available) you should connect to the Base Unit
directly with your laptop via an Ethernet crossover cable and access the web interface using the fixed IP
address 192.168.1.23. Make sure your own LAN adapter is set in the 192.168.1. range.
To access the Configurator via a direct connection.
1. Connect the Base Unit to your laptop using an Ethernet cable.
2. On your laptop, open a browser.
Note: Supported browsers are Internet Explorer, Firefox and Safari.
3. Browse to http://192.168.1.23.
A login screen appears.
4. Enter the user name 'admin' and the password, read and accept the EULA and click OK.
By default the password is set to 'admin'.
The configurator opens.
To access the Configurator via the Base Unit wireless network
1. On your laptop, connect to the Base Unit wireless network.
The default SSID and password to connect to the Base Unit are respectively 'ClickShare-<serial base number>' and 'clickshare'.
2. On your laptop, open a browser.
Note: Supported browsers are Internet Explorer, Firefox and Safari.
3. Browse to http://192.168.2.1.
A login screen appears.
4. Enter the user name 'admin' and the password, read and accept the EULA and click OK.
By default the password is set to 'admin'.
The web interface opens.
Older laptops might not support the 5 GHz Frequency Band. If your Base Unit is set to that frequency range,
those devices will not be able to connect to the Base Unit via the wireless network.
Overview of functions
Group
Personalization
Display & Audio
Wi-Fi & Network
Security
System
Support & Updates
When a setting is changed, always click Save changes to store the changes.
24
Function
On-Screen ID
Wallpaper
Configuration Files
Display & Audio
Wi-Fi Settings
LAN Settings
Sharing Protocols
Control interface
Compatibility
Passwords
Base Unit Status
Date & Time
Energy Savers
Buttons
Firmware
Troubleshoot
R5900022 CS-100 16/02/2016