Sanofi-aventis SoloSTAR Quick Start Manual page 5

Set the dose and inject
1
Set your selected
dose. If you turn the
dosage knob past the
unit you wish to
inject, just turn it
back to the correct
unit.
2
Inject your dose in the way that your diabetes nurse
or doctor showed you. Stick the needle into your skin
and press the injection button all the way in. As you
inject, the dose window counts down to "0".
3
Keep holding the injection
button in for a count of 10,
then pull the needle out.
Once you have injected
4
Put on the outer
needle cap and
unscrew the needle.
Dispose of the needle
in the way that you
have been shown.
Needlestick injuries
are avoided by not
using the inner needle
cover. Put the pen cap
on your Solo-Star and
put it in a safe place.
NB
Always remove the needle after an injection
to store the SoloStar without a needle. This
helps to prevent contamination, air bubbles
and insulin leakage.
10 sec.