Advertisement
How to get started
1
Check that you have
the correct insulin.
Lantus SoloStar is
grey with a purple
injection button.
Apidra SoloStar is
blue with a dark blue
injection button.
Remove the pen cap
and check that the
insulin is transparent.
2
Attach a needle to
the rubber seal,
ensuring that it is
properly aligned with
the pen. Screw or
push the needle on
depending on which
needle you are using.
3
4
5
7
Carry out a safety test prior to each injection
Select a dose of
2 units by turning the
dosage knob
clockwise. Remove
the outer and
inner needle covers.
Hold the pen with the
needle pointing up. Get
rid of any bubbles by
tapping on the insulin
reservoir.
Press the injection
button all the way in.
Check that there is
insulin coming out of the
tip of the needle
and that the
dose window
is displaying
"0".
Advertisement
