Samsung A837 Rugby User Manual page 152

Select the parameter you want to edit:
3.
• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to
the network.
• Protocol: set the connection protocol used by the WAP browser:
WAP, HTTP, or Other.
• Home URL: enter the URL address of the page to use as
your homepage.
• Proxy address: MEdia Net set as the proxy server address
and port.
• Linger Time (Sec.): set a time period (in seconds) after which the
network is disconnected if there is no new data traffic.
• Advanced Settings: allows you to configure some of the
IP-specific information: Static IP, Static DNS, Server information,
and Traffic Class. Highlight this option and press the Edit soft key to
access the following options:
– Static IP: specify if you want to manually enter an IP address. Remove
the check mark if you want the server to automatically assign the IP
address.
– Local Phone IP: allows you to configure the local phone IP address.
149
– Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address.
– Remove the check mark if you want the server to automatically assign
the address.
– Server 1/Server 2: enter the Domain Name Server (DNS) addresses.
– Traffic Class: select the traffic class, press the Edit soft key, select a
Traffic Class (Subscribed, Conversation, Streaming, Interactive, or
Background) and press the OK soft key.
Note: The WAP settings may vary depending on the service provider.
IMS Settings
IMS is the method used to connect to the server and set up the
Video Share option.
• Service : allows you to set the IMS service to On or Off. The default
setting is On. If you set the IMS Service to Off, you are unable to use
the Video Share option.
Profile: allows you to set the type of server. If you change from the
•
default AT&T IMS, you may not be able to use Video Sharing.
Note: Setting the IMS setting to Off may save minutes and memory.