Display Mode - Lexus CT 200h Owner's Manual

2-4. Using other driving systems

Display mode

■
The rear view monitor display mode can be adjusted when the "POWER" switch is
in ON mode and the shift position is in R.
To select a display language (English, French or Spanish).
●
Push and hold the "AUTO" (type A),
STEP 1
button for 6 to 12 seconds.
The monitor should turn on and the indicator should turn green.
Push the "AUTO" (type A),
STEP 2
Each time the "AUTO" (type A),
STEP 3
is pushed and released, the language will change.
The warning message should flash 5 seconds after the button is released,
indicating that the change has been completed.
To permanently disable the monitor.
●
Push and hold the "AUTO" (type A),
for 12 to 15 seconds.
The monitor will turn off and on after 6 seconds. Continue holding the button
down until the display turns back off.
The indicator should flash orange.
The monitor will not automatically turn on again after the "POWER" switch is
turned OFF and ON.
To manually turn on the monitor when it is turned off.
●
Push the "AUTO" (type A),
cator should turn green.
258
CT200h_OM_OM76066U_(U)
(type B) or
(type B) or (type C) button.
(type B) or
(type B) or
(type B) or (type C) button. The indi-
(type C)
(type C) button
(type C) button