Bluetooth - Samsung HW-J250 User Manual

FUNCTIONS

BLUETOOTH

You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all without wires!
▶ To connect the Soundbar to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
1. Press the ( ) button on the main unit's top
panel or press the Bluetooth
remote control to display the
The LED will blink indicating that the
●
Bluetooth device is not connected yet.
2. Select the Bluetooth menu on the Bluetooth device
you want to connect. (Refer to the Bluetooth
device's user manual.)
3. Select the Stereo headset menu on the Bluetooth
device.
You will see a list of scanned devices.
●
4. Select "[Samsung] Soundbar J-Series" from the
list.
If the Bluetooth device is successfully connected
●
to the Soundbar, then the
blinking.
If the Bluetooth device has failed to pair with the
●
Soundbar, delete the previous "[Samsung]
Soundbar J-Series" found by the Bluetooth
device and have it search for the Soundbar again.
5. Play music on the connected device.
You can listen to the music playing on the
●
connected Bluetooth device over the Soundbar.
In BT mode, the Play/Pause/Next/Prev functions
●
are not available. However, these functions are
available in Bluetooth devices supporting AVRCP.
button on the
icon LED.
LED will stop
16
Connect
Bluetooth device
If asked for a PIN code when connecting a
●
Bluetooth device, enter <0000>.
Only one Bluetooth device can be paired at a
●
time.
The Bluetooth connection will be terminated
●
when you turn the Soundbar off.
The Soundbar may not perform Bluetooth
●
search or connection correctly under the
following circumstances:
- If there is a strong electrical field around
the Soundbar.
- If several Bluetooth devices are
simultaneously paired with the Soundbar.
- If the Bluetooth device is turned off, not in
place, or malfunctions.
- Note that such devices as microwave
ovens, wireless LAN adaptors, fluorescent
lights, and gas stoves use the same
frequency range as the Bluetooth device,
which can cause electric interference.
The Soundbar supports SBC data (44.1kHz,
●
48kHz).
Connect only to a Bluetooth device that
●
supports the A2DP (AV) function.
You cannot connect the Soundbar to a
●
Bluetooth device that supports only the HF
(Hands Free) function.
Once paired, if the Soundbar is in D.IN, AUX,
●
or USB mode, selecting "[Samsung]
Soundbar J-Series" from the list on your
Bluetooth device will automatically change
the Soundbar's mode to BT.