Advertisement
Setting the Hospitality Option Data
➣
Depending on Model and Region, some menu are NOT exist at TV set.
Hotel TV Function
No
Description
Category
intial value
1
Hospitality Mode
Standalone Select the Hotel TV mode. (Standalone / Interactive)
2
SI Vendor
OFF
Select the SI Vendor
Set the default values, which will be applied when the
TV is turned on.
Power On Channel
Last Saved
- User Defined : Refers to the settings configured for
EN
Power On Channel, Channel Type.
- Last Saved : Refers to the last saved settings.
Power On Channel
1
The TV will turn on to this particular channel.
Provides channel Type description for Power On
channel selected.
Channel Type
ATV
i.e.Selected channel analog or Digital & Antenna
selection(Air or Cable).
Set the default volume values which will be applied
when the TV is turned on.
3
Power On
Power On Volume
Last Saved
- User Defined : Uses the settings configured for
EN
Power On Volume.
- Last Saved : Uses the last saved settings.
Power On Volume
10
TV will turn on with this Volume Level.
Min Volume
0
Minimum Volume Level setting user can set
Max Volume
100
Maximum Volume Level setting user can set
Power On Source
TV
Select the Input source when TV is turned on initially.
Power On(AC Power On) Option
- Standby : Stand-By Mode
Power On Option
Last Option
- Power On : Power On
- Last Option : Last Power On State
User can set channel option.
Channel Setup
Such as Auto Tunning, Manual Tunning, Antenna setting.
Provided option for editing the Channel Name
Channel Editor
,Number and video Mute settings for channels in the
channel List.
Mixed Channel Map
ON
Mix Air and Cable Channels
Off : There is no check of the DTV Program channel
information. DTV channel editor is accessible, but
addtional channel Program number auto updates are
Dynamic SI
OFF
not supported
ON : Check the DTV Program channel information.
4
Channel
DTV channel editor is inaccessible.
This is a display option for the OSD text that appears
when a user configures the country specifications in
hotel models. This option determines whether to activate
the items that are only executed after a manual user
Channel Rescan
confirmation when the notification message is displayed
ON
Message
while the country specifications are being configured.
On - When the TV has an event for setting changes
because of country spec, this will be shown on the screen.
Off - Even TV has an event for setting change, because
of country spec, it will not be shown on the screen.
Hotel TV Function
No
Description
Category
intial value
Enter Self Diagnosis Menu.
- Picture Test: Use to this check for picture
problems. If problems appear in the test picture,
Self Diagnosis
select Yes and follow the directions on the screen.
―
for TV
- Sound Test: Use the built-in melody sound to
check for sound problems. If problem occurs
during the test, select Yes and follow the directions
on the screen.
HD Function Check Menu
18
Service
On Executing Item Below OSD is displayed-
Self Diagnosis for
―
STB SI Vendor Setting : SI Name Ok/Failure
HTV
Bathroom AMP : Ok/Failure
RTC : Ok/Failure
SW UPGRADE
SW USB Update function
Service Pattern
OFF
Same function with SVC Service Pattern
TV Reset
―
Factory reset
[HB670_460-QSG]BN68-04956B_03Eng.indd 2
Hotel TV Function
No
Description
Category
intial value
Mychannel En
OFF
Set the My channel function ON/OFF.
5
MyChannel
Genre editor
-
User can set the genre for searched channels.
Picture Menu Lock
OFF
Enable or disable the Picture Menu.
ON : Main Menu display
Menu Display
ON
6
Menu OSD
OFF: Main Menu No display
Channel Menu
ON: Channel menu display
OFF
Display
OFF: Channel menu no display
Front panel(Local key) operation on/off.
- Unlock: Unlock All panel keys.
- Lock: Lock All panel keys.
7
Operation
Panel Button lock
Unlock
- OnlyPower : Lock All panel keys except the Power
panel key.
- Menu/Source : Lock Menu and Source panel keys.
Off : No clock option of Factory menu shall work.
Only Main menu.
Clock Type
OFF
SW Clock: SW clock shall work only.
Ext. Clock: LED Clock related item to work as
Dimming/Clock test/Time Format
Select the method to update the clock data
- Manual: Use clock data from DVB channel or
manual clock setting when the TV is in stand-alone
Local Time
Manual
mode.
- TTX: manual clock setting (with updating from
TTX data).
12 Hour :Time Format is 12 Hour type
8
Clock
Time Format
24 Hour
24 Hour:Time Format is 24 Hour type
Enable when Clock Type is "Ext. Clock".
Clock Test
Failure
Test Ext. Clock work or not
Clock Normal Dim level 0~4
Clock Normal Dim.
4
Enable when Clock Type is "Ext. Clock".
Clock Standby Dim level 0~4
Clock Standby Dim.
1
Enable when Clock Type is "Ext. Clock".
WakeUp: Timer type is wakeup mode. Set specific
time for the TV to turn on automatically
Timer Type
WakeUp
OnOff: Timer type is On and Off mode. Set TV to turn
it self on or off automatically at a specified time
User this for music output from an mp3/audio player
through an AV Input Source. When on, you can hear
sound from the player through the TV even when
Music mode AV
OFF
there is no video signal. The TV's backlight, however,
remains on. when adding a video signal, the TV
works normally.
User this for music output from an mp3/audio player
through an PC Input Source. When on, you can hear
sound from the player through the TV even when
Music Mode PC
OFF
Music
there is no video signal. The TV's backlight, however,
9
remains on. when adding a video signal, the TV
Mode
works normally.
User this for music output from an mp3/audio player
through an Component Input Source. When on, you
can hear sound from the player through the TV even
Music Mode Comp
OFF
when there is no video signal. The TV's backlight,
however, remains on. when adding a video signal,
the TV works normally.
Music Mode
Backlight On/Off option in Music mode to save
OFF
Backlight
energy
Licence
Hotel TV Function
No
Description
Category
intial value
If jack priority is set, the corresponding source is
7610 Priority AV
1
automatically set when a jack is inserted, according
to the jack priority
If jack priority is set, the corresponding source is
7610 Priority PC
2
automatically set when a jack is inserted, according
to the jack priority.
If jack priority is set, the corresponding source is
7610 Priority HDMI
3
automatically set when a jack is inserted, according
External
to the jack priority.
10
Device
Select RJP AV Source (Source selection depends
7610 AV option
AV1
on Model).
Select RJP HDMI Source (Source selection depends
RJP HDMI Option
HDMI1
on Model).
ON: TV speaker sound will be mute. Sound will come
out through HDMI. You must connect the Sound Bar
Sound Bar Out
OFF
to hear the sound (HB670 model: HDMI3).
OFF: Sound will come out through TV speakers normally.
When USB is connected to the TV,
- Default : Popup window appears.
- Automatic : Enters the USB contents menu
USB Media Mode
Default
automatically.
- Disable : Neither the pop-up window nor the menu
appears.
Users can set External Source Banner to On or Off.
On : When TV power is On or the Mode changs, the
External Source
External
ON
TV displays the external source banner.
11
Banner
Source
Off : When TV power is On or the Mode changs, TV
does not display the external source banner.
On : When an external source is connected to the TV,
the TV will auto-ident and switch to the input source.
Auto source
OFF
PC : Auto Ident PC Input only.
Off : Auto Source is Off.
Anynet+Return
Power On
Set the return source after closing Anynet+.
Source
Src
Determines the Sub AMP operation mode.
- 0: Turns the Sub AMP function off (PWM off).
- 1: Determines the Sub volume according to the
main volume control.
Sub Amp Mode
2
Bathroom
The sub volume is determined according to the
12
Speaker
Power On Volume, the Min Volume, and the Max
- 2: Determines the volume according to the
bathroom control panel setting.
Sub Amp Volume
6
Sub AMP Volume level during initial condition.
This feature adjusts the brightness of the TV in order
to reduce power consumption.
- Off: Turns off the energy saving function.
Eco
13
Energy saving
OFF
Solution
- Low: Sets the TV to low energy saving mode.
- Medium: Sets the TV to medium energy saving mode.
- High: Sets the TV to high energy saving mode.
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. When attaching
to other building materials, please contact your nearest dealer. If installed on a
ceiling or slanted wall, TV may fall and result in severe personal injury.
➣ Standard dimensions for wall mount kits are shown in the table below.
➣ Samsung wall mount kits contain a detailed installation manual. All parts necessary for
assembly are provided.
➣ Do not use screws that do not comply with the VESA standard screw specifications.
➣ Do not use screws that are longer than the standard dimension or do not comply with
the VESA standard screw specifications. Screws that are too long may cause damage
to the inside of the TV set.
➣ For wall mounts that do not comply with the VESA standard screw specifications, the
length of the screws may differ depending on the wall mount specifications.
➣ Do not fasten the screws too firmly. This may damage the product or cause the product
to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
➣ Samsung is not liable for product damage or personal injury when a non- VESA or
non-specified wall mount is used or the consumer fails to follow the product installation
instructions.
➣ Do not mount the TV at more than a 15 degree tilt.
➣ Always have two people mount the TV on a wall.
VESA screw hole
Standard Screw
Product
TV size in
Model
specs (A * B) in
(Length *
Quantity
Family
inch(cm)
millimeters
Pitch in mm)
28 inches
100X100
M4
(71.12cm)
32 inches
(81.28cm)
HG**AB670
200X200
40 inches
M8
(101.6cm)
LED-TV
4
46 inches
400X400
(116.84cm)
32 inches
(81.28cm)
HG**AB460
200X200
M6
39 inches
(99.06cm)
Do not install your Wall Mount Kit while your TV is turned on.
It may result in personal injury due to electric shock.
Hotel TV Function
No
Description
Category
intial value
Welcome Message
OFF
Displays a Welcome Message.
Edit Welcome
-
Edit the Welcome Message.
Message
User to set the logo display Off or to set the logo file
Logo
Hospitality Logo
OFF
type(BMP/AVI).
14
/Message
Hospitality Logo DL
-
Download the logo file from the USB toTV.
Logo Display Time
5 second
Set the logo display time (3/5/7 Seconds).
Clone TV to USB
-
USB Clone: TV → USB
Clone USB to TV
-
USB Clone: USB → TV
When Setting Auto Initialize is set to On, and the
power is turned off and on or the Master Power
15
Cloning
is turned off and on, the data is restored to the
Setting Auto Intialize
OFF
cloned values. If there is no cloned value, Setting
Auto Initialize is set to On, it will be ignored and the
operation will be the same as that when Setting Auto
Initialize is set to Off
REACH Server
Standby REACH Server occurs according to the
1hour
update Time
time setting
REACH Update
The TV activates REACH Server after 1 minute in
OFF
Immediate
Stand-by mode.
Set the default channel for REACH Server
REACH Server
- None : After Auto Scan, activate REACH Server
87
Channel
- Channel value : activate REACH Server on the
REACH
selected channel
16
Server
REACH Server
0000
Display REACH Server version of the TV uses
Version
REACH Server
Provided REACH Server ID for operating SIRCH on
ALL
Group ID
a specific set.
S-LYNK REACH
OFF
Set whether to use the REACH function.
S-LYNK REACH
ON
S-LYNK REACH Volume On and Off
Volume
TICKER
OFF
Ticker On and Off
Door Eye Mode
OFF
Door Eye function ON and OFF
Door Eye Source
AV1
Select the source that will display the door image
Prompt OSD mode ON and OFF
On:The OSD which is asking if you want the output
will be displayed.
- If the user press 'Yes', door image will be displayed
Prompt OSD
ON
in PIP or Full screen.
17
Door Eye
- If the user press 'No', Door Eye function will not
work.
Off:OSD will not be displayed and automatically
changed to PIP or Full size screen
Setting the time that decide how long will be
Source Return Time
7s
displayed the door image. (3S~20S)
Specifications
Display Resolution
1920 x 1080
Environmental Considerations
Operating Temperature
50°F to 104°F(10°C to 40°C)
Operating Humidity
10% to 80%, non-condensing
Storage Temperature
-4°F to 113°F(-20°C to 45°C)
Storage Humidity
5% to 95%, non-condensing
Stand Swivel (Left / Right)
-20˚ ~ 20˚
N/A
Model Name
HG40AB670
HG46AB670
HG39AB460
Screen Size
40 inches
46 inches
39 inches
(101.6 cm)
(116.84 cm)
(99.06 cm)
Power Consumption
Normal operation
106W
112W
92W
Standby
0.5W
0.5W
0.5W
Sound (Output)
10W x 2
Dimensions (WxDxH)
Body
928.2 x 49.4 x 552.3 mm
1059.6 x 49.4 x 626.2 mm
895.9 x 93.1 x 532.5 mm
With stand
928.2 x 227.7 x 610.1 mm
1059.6 x 227.7 x 684.0 mm
895.9 x 227.7 x 589.2 mm
Weight
Without Stand
8.5 Kg
10.8 Kg
7.8 Kg
With Stand
11.3 Kg
13.7 Kg
9.8 Kg
Display Resolution
1366 x 768
Environmental Considerations
Operating Temperature
50°F to 104°F(10°C to 40°C)
Operating Humidity
10% to 80%, non-condensing
Storage Temperature
-4°F to 113°F(-20°C to 45°C)
Storage Humidity
5% to 95%, non-condensing
Stand Swivel (Left / Right)
N/A
-20˚ ~ 20˚
N/A
Model Name
HG28AB670
HG32AB670
HG32AB460
Screen Size
28 inches
32 inches
32 inches
(71.12 cm)
(81.28 cm)
(81.28 cm)
Power Consumption
Normal operation
47W
63W
50W
Standby
0.5W
0.5W
0.5W
Sound (Output)
5W x 2
10W x 2
5W x 2
Dimensions (WxDxH)
Body
645.0 x 49.5 x 384.9 mm
737.9 x 49.5 x 435.8 mm
738.4 x 93.2 x 441.7 mm
With stand
645.0 x 252.6 x 435.6 mm
737.9 x 191.7 x 504.9 mm
738.4 x 191.7 x 497.7 mm
Weight
Without Stand
4.3 Kg
5.3 Kg
5.4 Kg
With Stand
4.7 Kg
7.3 Kg
6.0 Kg
➣ Design and specifications are subject to change without prior notice.
➣ For the power supply and Power Consumption, refer to the label attached to the product.
2014-03-21
2:53:13
Advertisement
