Daily Maintenance - Formax AutoSeal FD 2030 Operator's Manual

DAILY MAINTENANCE

1. It is recommended to let forms cool for one-half hour, from the laser printer, before folding and sealing. This
allows toner to set on the forms, and static electricity to discharge. A 400 Series Jogger is recommended for
best results. The Jogger squares the forms and dissipates heat and static created by laser printers.
2. If toner builds up on the metal sealer rollers clean the rollers with a lint-free cloth dampened sparingly with a
mild household cleaner.
3. Clean in-feed wheels and fold rollers with Formax recommended roller cleaner & rejuvenator to remove pa-
per dust and toner. A damp cloth with water is the best alternative. CAUTION: Do not use any chemicals other
than the roller cleaner & rejuvenator or water.
4