Advertisement
8.DMX
8.DMX
Channels
Channels
8.DMX Channels
8.DMX
Channels
Mode/Channel
Mode/Channel
Mode/Channel
Mode/Channel
Function
Function
Function
Function
Values
Values
Values
Values
16B
8B
DE
1
1
11
Pan
0-255
2
Pan Fine
0-255
3
2
12
Tilt
0-255
4
Tilt Fine
0-255
0-015
016-031
032-047
048-063
064-079
5
3
3
Color
080-095
096-111
112-127
128-189
190-193
194-255
0-009
010-019
020-029
030-039
040-049
050-059
6
4
4
Gobo 1
060-069
070-079
080-099
100-119
120-139
140-159
Description
Description
Description
Description
PAN Movement
Fine control of Pan movement
Tilt Movement
Fine control of Tilt movement
Open/White
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
Forwards rainbow effect from fast to slow
Color rotation stop
Backwards rainbow effect from slow to fast
Open
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 1 shake slow to fast
Gobo 2 shake slow to fast
Gobo 3 shake slow to fast
Gobo 4 shake slow to fast
periodic safety inspection of all installation material and the fixture. If you lack these qualifications,
do not attempt the installation yourself. Improper installation can result in bodily injury.
Be sure to complete all rigging and installation procedures before connecting the main power cord
to the appropriate wall outlet.
Clamp Mounting:
Clamp
Clamp
Clamp
Mounting:
Mounting:
Mounting: The IS200-MH provides a unique mounting bracket assembly that integrates
the bottom of the base, the included "Omega Bracket," and the safety cable rigging point in one
unit (see the illustration below). When mounting this fixture to truss be sure to secure an
appropriately rated clamp to the included omega bracket using a M10 screw fitted through the
center hole of the "omega bracket". As an added safety measure be sure to attached at least one
properly rated safety cable to the fixture using on of the safety cable rigging point integrated in the
base assembly
Regardless of the rigging option you choose for your IS200-MH, always be sure to secure your
fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the
hanging bracket as illustrated above. Be sure to only use the designated rigging point for the
safety cable and never secure a safety cable to a carrying handle.
5. 5. 5. 5. DMX-512
DMX-512
DMX-512
control
control
connections
connections
DMX-512 control
control connections
connections
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other
side to the male 3-pin XLR input of the moving head. You can chain multiple
Moving head together through serial linking. The cable needed should be two core, screened
cable with XLR input and output connectors. Please refer to the diagram below.
DMX-512 connection with DMX terminator
Advertisement
