Bushnell Trophy Cam HD 119676 Instruction Manual page 24

Parameter
Field Scan
Coordinate
Input
24
Settings
(Bold=default)
On, Off
(After On is
selected): "A"
Start/Stop, "B"
Start/Stop,
Interval
Off, On
See "Using the
Setup Menu
Input Screens"
Description
Turns Field Scan (Time Lapse)
recording mode on/off. When
activated, Field Scan forces the
camera to take photos or videos
even when it is not triggered by a
nearby live animal, useful for constant
monitoring of an area that might be
far away from the camera. The user
can set the start and stop times for
up to two independent "blocks" of
Field Scan recording, as well as the
interval time between each photo/
video. To ensure correct operation,
avoid setting overlapping start/stop
times for Field Scan A and B. Please
read the "Field Scan 2x..." section of
this manual for details on using this
feature. NOTE: If the "Camera Mode"
parameter is set to "Day" or "Night"
operation only, that will take priority
over your Field Scan settings. Set
Camera Mode to "24HR" if you are
setting day and night Field Scan start
and/or stop times.
Allows the user to input latitude
and longitude coordinates for the
camera's location. This data will
be embedded in the files saved on
the camera's SD card (if "On" is
selected). This makes it possible
to see each camera's location as a
"pushpin" on Google Earth maps
when reviewing a folder full of pho-
tos from multiple cameras, or use
other "geotag" capable software
(Picassa, etc).