Minolta PCL6 User Manual page 65

Symptom
Unable to staple
properly.
The stapling position
is opposite to what is
expected.
Folding cannot be
specified.
Folding is not per-
formed.
Unable to print an
image properly.
Possible cause
No stapling can be per-
formed on thick paper or
OHP transparencies.
When the Finisher is
installed, no stapling can be
performed if the number of
prints to be made exceeds
50.
No stapling can be per-
formed if the number of
pages to be printed is 50 or
more when a Booklet Fin-
isher is mounted.
No stapling can be per-
formed if the original docu-
ment contains pages of
different sizes.
The paper direction and N-
up do not match the setting
made for Orientation.
The optional Booklet Fin-
isher is necessary for you to
specify Folding. "Booklet
Finisher" must be selected
in the Device Options Set-
ting tab.
Folding may be disabled
when Staple is specified.
Folding cannot be per-
formed if tab paper or OHP
transparencies are used.
The machine's available
memory space is not suffi-
cient.
1. Troubleshooting
Action
Check the type of paper.
Check the number of prints to be
made.
Change the Orientation setting.
Select "Booklet Finisher" in the
Device Options Setting tab.
Check the settings made. (See
"Function combination matrix"
on p. A-2.)
Check the type of paper.
Add memory to expand the
machine's memory space or sim-
plify the image to reduce the
amount of data handled.
4-5