V2GO g0-210 User Manual page 22

The Repeat mode is comprised of 2 buttons (both shown as 14); the Repeat and the A/B buttons.
When playing a disc, press the Repeat button once and the connected monitor will display Rept 1,
indicting that the current song or chapter will repeat until the Stop button (30) is pressed.
Pressing the Repeat button again will cause the entire disc to repeat until the Stop button (30) is
pressed. Pressing Repeat again returns the mode to full disc play and stop. This mode is
available with any type of disc.
The A-B mode button allows the user to select a starting point and ending point to repeat within a
DVD chapter. This function will only work with DVD discs. While playing a DVD disc, press the A-
B button immediately followed by the Enter button (25) at the point that the section is to be
repeated from. Continue playing until the end of the section is reached and press A/B
immediately followed by the Enter button (25). The selected section will play repeatedly until
either the A-B button or the Stop button (30) is pressed. Function not applicable with CD+G discs.
Direct numeric access buttons are used to enter song or chapter numbers between 1 and 999.
Combinations of digits must be entered within 5 seconds of each other. Numbers entered that
exceed the number of tracks or chapters on the disc playing will be ignored.
Direct numeric access buttons are used to enter song or chapter numbers between 1 and 999.
Combinations of digits must be entered within 5 seconds of each other. Numbers entered that
exceed the number of tracks or chapters on the disc playing will be ignored.
The Zoom button (27) is used to magnify the image on the attached video monitor. The image
size is increased by a factor of 1.5x, 2x and 3x. Once an image is magnified, the Direction buttons
(24) may be used to move the magnified image across the connected video monitor. When
displaying JPEG images, use the ◄◄ (33) button to zoom out and the ►► (32) button to zoom
in. The JPEG image may be rotated using the Direction buttons (24).
The Search button (18) is used to select specific titles and chapters within a DVD disc. When the
Search button is pressed a search dialog will appear on the connected video monitor. Use the
right and left arrows to select Chapter or Title. Use the numeric keypad to enter specific Chapter
and Title numbers, followed by the Enter button (25). With the Musicarrier stopped and a USB
device connected, the Search button may be pressed to display the root directory of the USB
device. This function is inapplicable to CD+G discs.
The Step button (31) causes the DVD to pause playback. Once paused, each time the Step
button is pressed the DVD will scan forward 1 frame. Press the Play button (29) to resume
The Previous button (34) allows the user to interrupt the currently playing track or chapter and
skip backwards to the beginning of the currently playing track. The Next button (35) allows the
user to interrupt the currently playing track or chapter and skip forwards to the beginning of the
next track.
Repeat Mode Repeat Mode
16
Numeric Button Numeric Button
12
Directional Arrows
24
Zoom Button Zoom Button
27
Search Play Search Play
18
Step Button Step Button
31
& Previous And Next Previous And Next
34 35
22