V2GO g0-210 User Manual page 21

The N/P button (8) is used to switch between NTSC and PAL video format discs.
5. Depress the Stop button (30).
6. Depress the N/P button (8).
7. Within 2 seconds depress the Enter button (25).
8. Repeat this process as many times as necessary to get the video type necessary for proper
display on the attached video monitor.
This process allows the user to choose between MULTI, SYSTEM, NTSC and PAL. Settings for
480P, 576P, and 720P (HDTV only) should be selected in the SETUP menu described later.
NOTE: Occasionally when adjusting the GO-210's settings, the user may create a situation
where the system needs to be reset to factory defaults because the user may no longer be able to
view system information on the video monitor. To reset all functions to the factory default:
1. Turn the power off using the Power button on the GO-210.
2. Turn the Power back on.
3. Press the eject button on the GO-210.
4. Using the GO-210's front panel numeric keys, enter 222888
5. Press the Stop button (30)
6. Turn the power off using the Power button on the GO-210.
7. Turn the Power back on.
The Audio Output button (10) is used with DVD discs to access different audio modes available on
the DVD.
The R/L button (11) is used when playing CD, CD-G, VCD and MP3 format discs to select the
audio playback mode. Available modes are mono, left, right and stereo.
Video Type Select Video Type Select
8
Audio Output Audio Output
10
Audio Playback Mode Audio Playback Mode
11
21