Rf Watch Remote Control - HP ac300w User Manual

5.4 RF Watch Remote Control

Before using the RF watch remote control, you must pair it with the
camera.
Do the following to pair your RF watch remote control.
1. On the camera, press the Mode button repeatedly to
change to SET mode.
2. Press the Shutter button to enter SET mode.
3. Press the Mode button to highlight MORE.
4. Press the Shutter button to enter the MORE menu.
5. Press the Mode button to highlight BINDING.
6. Press the Shutter button to enter the BINDING submenu.
7. The camera RF antenna is enabled and ready to be
paired with the RF watch remote control.
8. On your RF watch remote control, press the MODE button
to switch to Preview mode. Then press and hold the SET
button to enter to SET mode.
MODE button
LEFT button
52
VIDEO button
PHOTO button
SET button
RIGHT button