Loop - HP ac300w User Manual

4.6 Loop

This menu allows you to set the camera to continuously record the
video until the memory card storage is full or the recording is
manually stopped.
Do the following to enable this feature.
1. Press the Mode button repeatedly to change to SET
mode.
2. Press the Shutter button to enter SET mode.
3. Press the Shutter button to enter the SETUP menu.
4. Press the Mode button to highlight LOOP.
5. Press the Shutter button to enter the LOOP submenu.
6. Press the Mode button to select ON.
7. Press the Shutter button to confirm.
32