Page 2
Copyright The information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this document. And makes no commitment to update or to keep current the information contained in this manual.
Do not expose your Panel PC to rain or moisture, in order to prevent shock and fire ♦ hazard. Keep PTDX5311/9211 away from humidity. ♦ Do not open the cabinet to avoid electrical shock. Refer to your nearest dealer for ♦...
Connector Pin Assignments ........9 External I/O Overview .......... 12 External I/O Pin Assignment......... 13 System Mapping........... 15 Watchdog Timver ..........18 C h a p t e r 3 Driver Installation…..………………………………..19 PTDX5311/9211 Development Note....20 BIOS Defaul Setting ..........21 Warranty.................... 22...
It has new Vortex86DX SoC CPU which consumes only minimum power requirement when running at 1GHz, and DDR2 memory provides faster data transfer rate. By using 5.7/8.9” TFT LCD, PTDX5311/9211 becomes the perfect choice for a limited budget. In additional, the...
2.3 Connector Pin Assignments J1: CF Master/Slave Switch Pin # Signal Name Master Slave J3: USB Pin # Signal Name Pin # Signal Name USBD2- USBD2+ J4: USB Pin # Signal Name Pin # Signal Name USBD3- USBD3+ J5: USB (Touchscreen) Pin # Signal Name USBD1-...
Page 14
J8: PS/2 Keyboard Pin # Signal Name Pin # Signal Name KBCLK KBDAT J9: PS/2 Keyboard/Mouse Pin # Signal Name Pin # Signal Name KBCLK MSCLK KBDATA MSDATA J10: COM1 RS232/422/485 (Change setting by BIOS) Pin # Signal Name Pin # Signal Name DCD1/ 422TX- / RS485- RXD1 / 422TX+ / RS485+...
Page 15
J27: LVDS Connector Pin # Signal Name 3.3V 3.3V BRIGHTNESS TXOUT0- TXOUT0+ TXOUT1- TXOUT1+ TXOUT2- TXOUT2+ TXCLKOUT- TXCLKOUT+ J24: MIC-IN Pin # Signal Name MICVREF MIC-IN PWR: Power Connector (5A) Pin # Signal Name...
Page 16
PWR: Power Connector (8A) Pin # Signal Name + 8 ~ 35V J29: Power/IDE LED Pin # Signal Name PWRLEDP PWRLEDN IDELEDP IDELEDN...
2.5 External I/O Pin Assignment Power Switch Pin # Status Power Connector (5A) Signal Name Pin # Power Connector (8A) Signal Name Pin # +8 ~ 35V J10: COM1 RS232/422/485 (Change setting by BIOS) Pin # Signal Name Pin # Signal Name DCD1/422TX-/RS485- RXD1/422TX+/RS485+...
Page 19
Audio Line-Out Signal Pin # Name LOUTL Open Touch Open Touch VREFOUT Pin # Signal Name USB0- USB0+ GGND GGND RJ45 Pin # Signal Name Pin # Signal Name FTXD+ FTXD- FRXIN+ FRXIN- PS/2 Keyboard/Mouse Pin # Signal Name KBCLK PMCLK KBDAT PMDAT...
EEPROM. Operating system support The PTDX5311/9211 provides the VGA and LAN drivers for DOS 6.22, Windows CE 5.0, CE 6.0, Windows XP Professional, and Windows Embedded standard (XPE).
Master or Slave <Linux installation note> Please forced the IDE settin g in BIOS to PIO mode before install Linux on PTDX5311/9211 as follows: 1-Go to the advanced BIOS setting and make the “Onboard IDE Operate Mode” is “Legacy Mode”...
Note: 1-Wi-Fi module is optional 2 -PTDX5311/9211 COM1: support RS232/422/485 and select by BIOS SETUP. 3 -PTDX5311/9211 series (CPU Speed: 1GHZ): Support Free DOS,DOS 6.22,DR-DOS,x-DOS,Xlinux,Embedded Linux, Windows CE 5.0, CE 6.0, Windows XP Professional, and Windows Embedded standard(XPE). 3.2. BIOS Default setting If the system cannot be booted after BIOS changes are made, Please follow below procedures in order to restore the CMOS as default setting.
Warranty This product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no additional charge except as set forth in the following terms.
Need help?
Do you have a question about the PTDX5311 and is the answer not in the manual?
Questions and answers