Vesper WMX850 User Manual page 23

▲
Increase the value at the current character position
▼
Decrease the value at the current character position
 Move to the next character position
Enter Complete the field entry and return to the previous screen allowing you to select
another field to modify
If you make a mistake and want to go back to the previous character position, press the
Enter button to accept the value and then press the Modify button to change it again.
When you have finished entering your configuration data, press the OK button to save your
changes.
Important Notice
You cannot change the MMSI number once it has been saved in the unit. Enter the number
carefully and only use an assigned MMSI for your vessel. If you need to change the MMSI
number in your unit you must contact an authorized dealer or Vesper Marine.
The WatchMate will not transmit your data until your MMSI has been entered.
AIS
When you enter your MMSI number and press the OK button to save it, the following screen
is displayed. Press the Yes button to proceed and save your changes. Press the No button
to return to the configuration screen.
If you wish to abort the configuration operation without saving any changes, press and hold
the power button for 2 seconds.
- 23 -