Operation; General Information; Controller - Active Care Medical Intrepid Owner's Manual

For service assistance, please call your authorized ActiveCare dealer.

GENERAL INFORMATION

1. Make sure that the motor levers are in engaged mode. (Parallel to the wheels)
2. Once seated on the wheelchair, turn on the power (Press the power button). The battery
gauge will turn on.
3. We suggest the new users and the disabled operate the chair in low speed until
comfortable with the chair and its use.
4. Start to steer, moving the joystick to drive forward, backward, left or right. If you want to
stop the wheelchair, release the joystick—it will automatically return to the center position
to stop the chair.
5. The chair's speed is automatically reduced by half when the chair is turning.
6. When driving the chair on a slope, push the joystick forward to keep the chair
continuously climbing until you reach the top of the slope. While the chair is climbing a
steep slope, position your body forward to prevent the front wheels from lifting.
7. When driving the chair down a slope, drive slowly and prepare for an emergency stop if
you feel it difficult to control the chair. If the speed increases, release the joystick to slow
down or to stop, then start again at a slower speed.

CONTROLLER

Speed Down Button
Joystick
Speed Up Button
Battery Gauge
When the power chair is turned on, the battery gauge will light up as indicated below:
Green lights: the battery has full capacity.
Orange lights: do not drive power-chair for a long trip.
Red lights: the power-chair should be charged as soon as possible.
10

Operation

Service Indicator
Buzzer Button
Battery Gauge
Power On/Off
Intrepid Owner's Manual