Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for STARVILLE CB-100 LED Color Beam
Summary of Contents for STARVILLE CB-100 LED Color Beam
- Page 1 CB-100 LED Color Beam LED spotlight user manual...
- Page 2 Musikhaus Thomann e.K. Treppendorf 30 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 08.04.2013...
-
Page 3: Table Of Contents
Connections and operating elements................... 19 Operation..............................23 7.1 Starting up the device........................23 7.2 Main menu............................24 7.3 Settings menu........................... 28 7.4 Functions in 4-channel DMX mode................... 31 Technical specifications........................34 Plug and connection assignments....................35 Troubleshooting............................36 CB-100 LED Color Beam... - Page 4 Table of contents Cleaning............................... 38 Protecting the environment......................39 LED spotlight...
-
Page 5: General Notes
Our products are subject to a process of continuous development. We therefore reserve the right to make changes without notice. Symbols and signal words This section provides an overview of the symbols and signal words used in this user manual. CB-100 LED Color Beam... - Page 6 General notes Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a possible dangerous situation that can result in death or serious injury if it is not avoided.
- Page 7 General notes Warning signs Type of danger Warning – suspended load. Warning – danger zone. CB-100 LED Color Beam...
-
Page 8: Safety Instructions
Safety instructions Safety instructions Intended use This device is intended to be used as an electronic illumination effect using LED technics. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use. - Page 9 Always use proper ready-made insulated mains cabling (power cord) with a pro‐ tective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a regis‐ tered electrician. CB-100 LED Color Beam...
- Page 10 Safety instructions WARNING! Eye damage caused by high light intensity Never look directly into the light source. WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. NOTICE! Risk of fire Do not cover the device nor any ventilation slots.
- Page 11 Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire. CB-100 LED Color Beam...
-
Page 12: Features
Features Features This device is especially suitable for use on show stages. Special features of the device: Control via DMX (four channels) as well as via buttons and display on the unit Sound control Colour wheel with white, seven full-colours, split-colours and rainbow effect Electronic dimmer Overheat protection Shutter frequency: 0…20 Hz... -
Page 13: Installation
Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain. CB-100 LED Color Beam... - Page 14 Installation NOTICE! Risk of overheating Always ensure sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
- Page 15 Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. CB-100 LED Color Beam...
-
Page 16: Starting Up
Starting up Starting up Establish all connections as long as the unit is switched off. Use the shortest possible high- quality cables for all connections. LED spotlight... - Page 17 Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W). CB-100 LED Color Beam...
- Page 18 Starting up DMX indicator When the unit is in DMX mode, a flashing dot in the display indicates an incoming DMX signal. Otherwise, perhaps the DMX controller is shut down or the wiring is not correct. LED spotlight...
-
Page 19: Connections And Operating Elements
Connections and operating elements Connections and operating elements Bottom side CB-100 LED Color Beam... - Page 20 Connections and operating elements 1 CONTROL PANEL Display. 2 [MODE/ESC] button. Activates the main menu and toggles between menu items. Closes an opened submenu without saving the changes. 3 [UP] button. Increases the displayed value by one. 4 [DOWN] button. Decreases the displayed value by one. 5 [ENTER] button.
- Page 21 Connections and operating elements Top side CB-100 LED Color Beam...
- Page 22 Connections and operating elements 6 Bracket for hanging or setting up. 7 Locking screw for the bracket. 8 INPUT DMX input. 9 OUTPUT DMX output. 10 Fuse holder. 11 Safety eye. 12 IEC chassis socket for the power supply cable to the next unit. 13 IEC chassis connector for the mains power connection.
-
Page 23: Operation
Operation Operation 7.1 Starting up the device Connect the unit to the power grid to start operation. After a few seconds the display shows ‘d001’ . Now the device is operational. CB-100 LED Color Beam... -
Page 24: Main Menu
Operation 7.2 Main menu Press [MODE/ESC] for about 3 seconds to activate the main menu. Press [MODE/ESC] again to select a menu item. Use [UP] and [DOWN] to change the respectively displayed value. When the display shows the desired value, press [ENTER]. To return to the main menu without any changes, press [MODE/ESC]. - Page 25 ‘Co00’ … ‘Co17’ ). When the display shows the desired value, press [ENTER] to confirm the setting and then [MODE/ESC] to proceed to the next menu item. To change the menu item without making any adjustment, press [MODE/ESC]. CB-100 LED Color Beam...
- Page 26 Operation Dimmer setting Press [MODE/ESC] repeatedly until the display shows ‘MAn’ . Press [ENTER] to activate the oper‐ ating mode. Press [UP] or [DOWN] until the display shows ‘diMM’ . Press ‘Enter’ again, the dis‐ play shows ‘Lxxx’ . Now use [UP] and [DOWN] to adjust the brightness (display shows ‘L000’ … ‘L255’...
- Page 27 Press [MODE/ESC] repeatedly until the display shows ‘rESt’ . Press [ENTER] to reset the colour wheel to its default position. Loading defaults Press [MODE/ESC] repeatedly until the display shows ‘LoAd’ . Press [ENTER] to reset all values to the factory default settings. Overview (main menu) CB-100 LED Color Beam...
-
Page 28: Settings Menu
Operation 7.3 Settings menu Press [MODE/ESC] for about three seconds to activate the settings menu. Use [UP] or [DOWN] to enter the units password 2323. You can change the digit on the cursor position using the [UP] button. Use the [DOWN] button to move the cursor to the next position. Press [ENTER] when all digits have been set. - Page 29 Activate the settings menu. Press [MODE/ESC] repeatedly until the display shows ‘Ptxx’ . Use the [UP] or [DOWN] button to set the temperature, at which the overheat protection should be triggered (display shows ‘Pt50’ … ‘Pt99’ ). CB-100 LED Color Beam...
- Page 30 Operation Overview (settings menu) LED spotlight...
-
Page 31: Functions In 4-Channel Dmx Mode
7.4 Functions in 4-channel DMX mode Channel Value Function 0…255 Dimmer Colour wheel 0…7 White 8…15 Dark blue 16…23 Yellow 24…31 Pink 32…39 Green 40…47 48…55 Light blue 56…63 Orange red 64…71 White and dark blue CB-100 LED Color Beam... - Page 32 Operation Channel Value Function 72…79 Dark blue and yellow 80…87 Yellow and pink 88…95 Pink and green 96…103 Green and red 104…111 Red and light blue 112…119 Light blue and orange red 120…127 Orange red and white 128…191 Rainbow effect counter clockwise, increasing speed 192…255 Rainbow effect clockwise, increasing speed Shutter...
- Page 33 Function 216…255 Open Functions 0…10 No function 11…60 Blackout while colour wheel is rotating 61…110 Sound control 111…160 Blackout while colour wheel is rotating and sound control 161…210 Reset the colour wheel 211…255 Reset all channels CB-100 LED Color Beam...
-
Page 34: Technical Specifications
Technical specifications Technical specifications 10 W high-power LEDs Number of DMX channels Dispersion angle 2 ° Operating supply voltage AC 230 V , 50 Hz / AC 110 V , 60 Hz Power consumption 35 W Dimensions (W × D × H) 280 mm ×... -
Page 35: Plug And Connection Assignments
The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for the pin assignment of a suitable XLR plug. Configuration Ground, shielding Signal inverted (DMX–, ‘cold signal’) Signal (DMX+, ‘hot signal’) CB-100 LED Color Beam... -
Page 36: Troubleshooting
Troubleshooting Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation. - Page 37 DMX interface circuits. If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de. CB-100 LED Color Beam...
-
Page 38: Cleaning
Cleaning Cleaning Optical lenses Clean the exterior of accessible optical lenses periodically to optimise light output. The fre‐ quency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. Clean with a soft cloth using normal glass cleaning products. -
Page 39: Protecting The Environment
Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. CB-100 LED Color Beam... - Page 40 Notes LED spotlight...
- Page 41 Notes CB-100 LED Color Beam...
- Page 42 Notes LED spotlight...
- Page 44 Musikhaus Thomann e.K. · Treppendorf 30 · 96138 Burgebrach · Germany · www.thomann.de...
Need help?
Do you have a question about the CB-100 LED Color Beam and is the answer not in the manual?
Questions and answers