Safety Information; Safety Guidelines - DeWalt DWFP55130 Instruction Manual

Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
i_,DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
i_WARNING: Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
_CAUTION: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
k_ 1
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUTTHIS OR
ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT
(1-800-433-9258}
Important Safety Instructions
i_ WARNING: Do not operate this unit until you read this instruction
manual for safety, operation and maintenance instructions.
i_WARNING: This product contains chemicals known to the State
of Califomia to cause cancer, and birth defects or other reproductive
harm. Wash hands after handling.
i_WARNING: Some dust contains chemicals known to the State of
California to cause cancer, birth defects or other reproductive harm such
as asbestos and lead in lead based paint.
SAVE THESE INSTRUCTIONS
J_ DANGER: RiSK OF EXPLOSION OR FiRE
WHAT CAN HAPPEN HOW TO PREVENT IT
• It is norma/fore/ectrica/ O Always operate the
contacts within the motor compressor in a well ventilated
and pressure switch to area free of Combustible
spark. . materials, gasoline, or solvent
vapors.
if electrical sparks from
compressor come into
contact with flammable
vapors, they may ignite,
causing fire or explosion.
Restncr/ng any of the
compressor ventilation
openings will cause serious
overheating and coulo cause
fire.
• Ifsprayingflammable
materials, locate compressor
at least 20' (6.1 m) away
from spray area. An additional
length of air hose may be
required.
• Store flammable materials in
a secure location away from
compressor
o Never place objects against or
on top of compressor
• Operate compressor in
an open area at least 12"
(30.5 cm) away from any walJ
or obstruction that would
restrict the flow of fresh air to
rne ventilation openings
o Operate compressor in a
clean, dry wel! ventilatea area.
Do not operate unit in an_,
confined area. Store indoors.