ADLY MOTO TB-50 Owner's Booklet page 33

ENGINE OIL CHANGE
CHANGE ENGINE OIL AT FIRST 300 KM AND THEN CHANGE AT EVERY 2000KM.
ENGINE OIL CAPACITY： 0.7 LITER
CHANGE METHOD:
1. REMOVE THE OIL GAUGE.
2. REMOVE THE OIL DRAIN SCREW AND DRAIN THE OIL.(THE OIL WILL DRAIN MORE
EASILY WHEN THE ENGINE IS WARM)
3. REMOVE THE SCREW OF OIL FILTER.
4. REMOVE AND CLEAN THE OIL FILTER THEN REINSTALL IT.
5. WIPE THE DRAIN SCREW CLEAN AND REINSTALL IT.
6. REFILL FRESH ENGINE THE OIL FOR 0.7 LITER.
7. FIRMLY TIGHTEN THE OIL GAUGE.
8. WARM UP THE ENGINE AND CHECK THE OIL LEVEL AGAIN AFTER THE ENGINE IS
STOPPED FOR 10~20 SECONDS.
CAUTION:
1. USE THE 10W/40 4-STROKE ENGINE OIL. THE OIL LEVEL SHALL NOT EXCEED
THE UPPER LIMIT.
2. WHEN THE VEHICLE OFTEN RIDDEN ON MACADAM ROAD 、RIDDEN FOR SHORT
DISTANCE、FOR
28