Fujitsu DL7400 Installation Manual page 4

No. Task
6 Website http://jp.fujitsu.com/group/fit/en/support/downloads/dl7/
download the driver for Fujitsu DL7400 for backup purpose, in case the CD
driver software cannot be read
7 Call the user 2 hours before onsite to re-confirm the appointment
8 If the dedicated workstation to install the printer is owned by GHA, please ask
local GHA support staff to provide with local administrator
username/password.
9 If the installation is on a CX GalaCXy PC then get the PC Asset Id (which is in the
format "MXXXXXX") and submit it to the Fujitsu Hong Kong team so that the
required IE8 configuration settings can be set remotely.
should not go onsite until it has been confirmed that the IE8 configurations
have been deployed to the specified PC.
Important Notes for Fujitsu Engineer:
- Based on the customer request, there is one dedicated workstation required
to install the printer software by the onsite engineer.
- Only the Fujitsu printer software and the Ezyfreight batch program can be
installed on the user workstation, any other software installation requests
with/without user requests are prohibited. By performing such request
which is not allowed, will severely violate customer's security policy.
Installation guide for Fujitsu Dot Matrix Printer_1.6
to
The Fujitsu Engineer
Complete
(Please tick)
Page 4