Milwaukee Hammer-Drill Operator's Manual page 13

Always remove battery pack before changing or removing ac-
cessories. Only use accessories specifically recommended for
this tool. Others may be hazardous.
For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go
on-line to www.mil-electric-tool.com. To obtain a catalog, contact your local distributor or
a service center listed on the back cover of this operator's manual.
1/2" Keyless Chucks
Cat. No. 48-66-1575
Rugged steel housing with rust resistant nickel plated jaws and body.
For cordless drills with 1/2" - 20 thread.
Hammer-Drill Accessory Kit
Cat. No. 48-30-0101
Includes 1/4" socket driver, 6F-7R slotted bit, #1 and #2 Phillips bits, 1/4"
and 3/16" twist bits, and two 1/8" twist bits.
Plastic Carrying Case
Cat. No. 48-55-0930
Side Handle
Cat. No. 49-15-0400
ACCESSORIES
WARNING!
13