Telstra Gateway Pro™ Quick Start Guide - Tesla GATEWAY PRO User Manual

Your Gateway can be set up in 3 easy steps:
Step 1: Connect the cables as per Figure 9.
Step 2: Connect your devices to the Gateway, either using an Ethernet cable or via Wi-Fi.
How to:
Step 3: Activate your Internet service and voice service using the Setup Wizard.
How to:
For more detail on the Setup Wizard screens refer to Section 3.1 of this Guide.
2.4. Telstra Gateway Pro™ Quick Start Guide
The Telstra Gateway Pro™ Quick Start Guide provides a full set of instructions on how to set up your
Gateway. Please refer to the link below to access the Telstra Gateway Pro™ Quick Start Guide:
https://www.telstra.com.au/small-business/bundles/dot
Steps 4 and 5 of the Telstra Gateway Pro™ Quick Start Guide provide details about how you can
manage and troubleshoot your Gateway.
TELSTRA GATEWAY PRO USER GUIDE
™
Your Wi-Fi Network Security card contains the Network names and Network Key to connect
your devices to both the 2.4GHz and 5GHz bands.
The Setup Wizard can be accessed by either Ethernet or Wi-Fi by typing the Telstra default IP
address, 192.168.15.1, into your preferred browser. This will start the wizard and you can follow
the screens and prompts to complete.
Figure 10: Quick Reference Guide
13