Image - Orion Technology 320LEDK User Manual

3. Press the up/down cursor keys on the remote control or the " ▲/▼ " keys on the control
panel to select an item to be adjusted.
4. Press the left/right keys on the remote control or the "
change or set the analog value of the selected item.
5. When the main menu appears on the screen, you can press the "Menu" key to exit from the
main menu. When a submenu appears on the screen, you can press the "Menu" key to return to the
previous menu. Press the "Source" key to enter the "Input Source" menu and press it again to exit.
6. In menu operations, the currently inoperable items will turn grey.
7. The User's Manual describes the menu
operations under Video 1 as an example; menu
operations for other signal sources are
basically identical.

Image

Select to enter the submenu [Image],
press the up/down cursor keys on the remote
control or the " ▲/▼ " keys on the control
panel to select an item to be adjusted, and then
press the left/right cursor keys on the remote
control or the " " keys on the control panel to change the analog value or status of the
selected item. (See the table below)
★ Tips
The analog values of contrast, brightness,
color saturation, color tone and definition
adjusted by the
automatically as the user mode.
★ Image Mode shortcut keys on remote
control: Press the "Image Mode" key on the
remote control to switch among four modes as
follows: Standard, Soft, User and Bright.
user will be saved
Adjust Select
" keys on the control panel to
Image mode
Contrast
Brightness
Color saturation
Color tone
Definition
Adjust Select
(Series other than 002-S)
Image mode
Contrast
Brightness
Color saturation
Color tone
Definition
Adjust Select
(002-S)
Menu: Exit
Soft
4:3
Standard
Menu: Exit
Soft
4:3
9300K
Menu: Exit