Operations - Sanha jlh-202d User Manual

Operations

1
Charging Indicator: While charging, the LED indicator will be
constantly on, meaning that charging is operating normally.
2
Wireless Microphone Volume Control:
Used to adjust the volume of the wireless microphone
( recommended to be set at the 1 O'clock position).
3
Wired Microphone Volume Control: Used to adjust the volume of
the wired microphone.
4
Power Indicator/Rechargeable Battery Low Power Indicator:
Red light power indicator/
5
Wired Microphone Input Jack: 6.4mm aperture wired microphone.
6
AUX Input Volume Control: External audio input volume.
7
Wireless Microphone Reception Signal Indicator: When the
wireless microphone is on, the
8
Auxiliary Input Jack: MP3 external audio input jack.
9
Signal Output Jack: Used for external MP3 recording or by
output systems.
10
AC Power Cord Socket: AC90V~264V 50HZ~60HZ
11
DC Rechargeable Battery 12V/1.2A
(Recommend using YUASA#NP1.2-12)
12
ID Code Mark Location: Marked inside the DC battery (the
battery must be removed)/under the main unit.
13
Power Switch/Charger Switch: Push up for main unit power/
middle OFF/push down to charge battery.
14
AC Power Cord Storage Device
Yellow light low battery power display.
green light will be on.
2