Program Diagram - Haier TV-8888-03 Service Manual

Program Diagram

Insert the power plug into the power line socket and insert the antenna plug into the
antenna socket on the rear panel. Press down the power switch of the TV set. The red
indicator light goes on.
Program preset
A. 1) Auto searching and storing program
Press MENU button on the remote controller to call up the "PREST" menu on the
screen. Use the " " key to select the bar "auto search" then press the
" " to make sure. If you want to stop, press the "
2) Deleting channel number
Press channel up/down buttons to select a channel to skip. Press MENU to call up
the "PREST" menu on to the screen. Then Press the " " item to select the bar
"Add/Delete" then use the "
B. Volume tuning
Press VOLUME buttons VOL- to decrease and VOL+ to increase the volume.
C Personal preference settings
Picture modes
Press P.STD repeatedly to change among Personal, Standard, Vivid, and Soft to
change the Picture Mode.
" key to select Add or Delete.
" key.
15