Web-Based Setup - D-Link DAP-1330 User Manual

Section 3 - Configuration
To access the setup utility for the DAP-1330 N300 Wi-Fi Range Extender on your
PC, first connect to the DAP-1330 wirelessly using the Wi-Fi name (SSID) and
password located on your Wi-Fi Configuration Card. Then open a web browser
and enter http://dlinkap.local./ in your browser's URL field. You may also enter
the IP address* of the DAP-1330.
* The default IP address is 192.168.0.50. Once your DAP-1330 connects to the host network,
it will be assigned a new IP address based on your network's DHCP settings. You will need
to log in to your router to see what IP address is assigned to your DAP-1330.
For multiple DAP-1330s, go to http://xxxx.local./ as shown on the included Wi-Fi
Configuration Card, with "xxxx" being the last four digits of the DAP-1330's MAC address.
Enter your password. By default, Admin is the username and cannot be changed,
and by default, the password is blank.
The configuration interface will open, and you can configure the various settings
for the DAP-1330. If you have not yet configured an uplink network, the home
screen will show that there is no connection between the DAP-1330 and the
uplink router.
D-Link DAP-1330 User Manual

Web-based Setup

19