Summary of Contents for Audio international VA-401-x
Page 1
Installation Manual VA-401-x Video Distribution Amplifier Document # 540328 7300 Industry Drive, North Little Rock, AR 72117 Phone: 501-955-2929 Fax: 501-955-2988 www.audiointl.com...
11-12 PROPRIETARY NOTICE: Despite any other copyright notice, this document and information disclosed herein contains confidential, proprietary designs owned by Audio International, Inc. Neither this document nor the data contained herein shall be reproduced, used or disclosed to anyone without the written authorization of Audio International, Inc.
This manual contains information for the proper installation and operation of the Audio International, Inc. (AI) Video Distribution Amplifier, Model No. VA-401-x. The “-x” suffix designates the type of connector utilized; “-1” = Positronic and “ - 2” = D-Subminiature. Also included are physical and electrical characteristics of the unit.
Audio International, Inc. VA-401-x Installation Manual Application Introduction Five (5) BNC connectors on the rear of the unit allow for one (1) video input and four (4) video outputs. This makes the unit ideal for driving multiple monitors from one (1) video source. BNC1 is always designated as video input.
• Environmental conditions (temperature, humidity, etc.) • Length of cable runs 3.1.2 The VA-401-x shall be installed to conform to the standards designated by the customer, installing agency, and existing conditions as to the unit location and type of installation.
Audio International, Inc. VA-401-x Installation Manual Cautions and Warnings 3.3.1 It is important to do a pin-to-pin power and ground check on all connectors. Ensure that power and ground are applied only where specified. Damage to the unit may result if power or ground is applied to the wrong points.
Electrical Characteristics 3.6.1 Refer to Section 5.0 for electrical specifications. 3.6.2 The VA-401-x has five (5) BNC connector locations on the rear of the unit. BNC1 will always be designated as video input. The video output signal is directed out BNC jacks 2 through 5.
Verify +28 VDC power has been connected to the unit. Load the video source equipment with selected material. With the aircraft and video power “ON”, verify power to the VA-401-x unit. Verify selected material may be viewed on the appropriate screen(s). Document # 540328 Rev. IR, 02/2007...
International, Inc. product support for assistance. Scheduled Maintenance No scheduled maintenance is required to ensure continued airworthiness. VA-401-x has no customer-serviceable parts. If the unit does not work properly, it should be removed and replaced. Contact Audio International for details.
Audio International, Inc. VA-401-x Installation Manual Specifications Unit Specifications: Physical Specifications Housing Aluminum Weight 0.6 lb / 0.27 kg Dimensions 3.08" x 5.0" x 1.05" (l x w x h) 7.82 cm x 12.7 cm x 2.67 cm Electrical Power 200 mA @ +28 VDC Typ.
Audio International, Inc. VA-401-x Installation Manual Reference Drawings The following diagrams show the unit dimensions, mounting locations, and connector locations for the VA-401-x Back View Front View Document # 540328 Rev. IR, 02/2007 Page 11 of 12...
Page 13
Audio International, Inc. VA-401-x Installation Manual Side View Top View Document # 540328 Rev. IR, 02/2007 Page 12 of 12...
Need help?
Do you have a question about the VA-401-x and is the answer not in the manual?
Questions and answers