Bottom View ZN-7100-DE500-G 802.11n Dual-Band Outdoor Access Point Quick Setup Guide This Quick Setup Guide provides step-by-step instructions on how to set up your ZN-7100- Item DE500-G Outdoor Access Point on your network. This guide is intended for use by...
Page 2
2. Select Wireless Mode: FAT AP. 2. Insert the other end to the assigned LAN port on 3. Select DHCP Client to obtain an IP address The ZN-7100-DE500-G access point comes with your PC as figured above. from the DHCP server automatically, or a PoE injector kit for connecting to power over 3.
Page 3
STEP 5: INSTALL THE AP 1. Disconnect the AP’s power adapter from the power outlet (or disconnect the PoE cable). 2. Move the AP to its permanent location (accessible to both power source and network connections). Note: Make sure that sufficient survey has been made to determine the best placement for maximum range, coverage, and network performance before installing.