Network Settings - Hitachi DK-H200 Operating Instructions Manual

Network Settings

The camera IP address can be set by a PC.
Use a RJ45 crossover cable.
Use two RJ45 straight-through cables and a hub.
1. Install the DeviceInstaller to a PC.
1) The DeviceInstaller can be downloaded from the following web site.
http://www.lantronix.com/device-networking/utilities-tools/device-installer.html
A PC does not have to be connected to the camera at this time.
Note
Microsoft .NET Framework must be installed on a PC beforehand.
The Microsoft .NET Framework can be downloaded from the following web site.
http://www.microsoft.com/net/
2) Follow the instructions on the screen to install the program.
Crossover Cable
CAMERA
Straight-through Cable
CAMERA
PC
HUB
PC
16