Hitachi DK-H200 Operating Instructions Manual page 57

Function menu
8.5.2 VF MARKER sub menu (VF MENU)
■ＶＦ ＭＡＲＫＥＲ ：＜
ＵＳＥＲ ＳＥＬ ：ＵＳＥＲ １
ＭＡＲＫＥＲ１ ＳＥＬ：＞
ＭＡＲＫＥＲ２ ＳＥＬ：＞
ＣＲＯＳＳ ＳＥＴ ：＞
ＢＯＸ１ ＳＥＴ ：＞
ＢＯＸ２ ＳＥＴ ：＞
ＯＴＨＥＲ ＳＥＴ ：＞
ＭＡＲＫＥＲ１ ＳＷ ：ＯＦＦ
ＭＡＲＫＥＲ２ ＳＷ ：ＯＦＦ
8.5.3 MARKER1 SEL/ MARKER2 SEL sub menu (VF MENU)
■ＭＡＲＫＥＲ１ ＳＥＬ：＜ＵＳＥＲ １
ＣＥＮＴＥＲ ＭＡＲＫ：ＯＦＦ
ＳＡＦＥＴＹ ＭＡＲＫ：ＯＦＦ
ＳＩＤＥ ４：３ ：ＯＦＦ
１３：９ ：ＯＦＦ
１４：９ ：ＯＦＦ
１５：９ ：ＯＦＦ
ＣＲＯＳＳ ：ＯＦＦ
ＢＯＸ１ ：ＯＦＦ
ＢＯＸ２ ：ＯＦＦ
■ＭＡＲＫＥＲ２ ＳＥＬ：＜ＵＳＥＲ １
ＣＥＮＴＥＲ ＭＡＲＫ：ＯＦＦ
ＳＡＦＥＴＹ ＭＡＲＫ：ＯＦＦ
ＳＩＤＥ ４：３ ：ＯＦＦ
１３：９ ：ＯＦＦ
１４：９ ：ＯＦＦ
１５：９ ：ＯＦＦ
ＣＲＯＳＳ ：ＯＦＦ
ＢＯＸ１ ：ＯＦＦ
ＢＯＸ２ ：ＯＦＦ
Note
This safety marker is synchronized with aspect ratio (4:3, 13:9, 14:9, 15:9, OFF (16:9) ) of the Side panel.
8.5.4 CROSS SET sub menu (VF MENU)
■ＣＲＯＳＳ ＳＥＴ ：＜ＵＳＥＲ １
Ｈ ＰＯＳＩＴＩＯＮ ： ５
Ｖ ＰＯＳＩＴＩＯＮ ： ５
Item Setting
USER SEL USER1/ 2/3/4
MARKER1 SEL
MARKER2 SEL
CROSS SET
BOX1 SET
BOX2 SET
OTHER SET
MARKER1 SW ON, OFF
MARKER2 SW ON, OFF
Item Setting
CENTER MARK ON,OFF
SAFETY MARK ON,OFF
SIDE 4:3 ON,OFF
13:9 ON,OFF
14:9 ON,OFF
15:9 ON,OFF
CROSS ON,OFF
BOX1 ON,OFF
BOX2 ON,OFF
Item Setting
H POSITION 0 to 255 5
V POSITION 0 to 255 5
CROSS MARKER
45
Initial
setting
MARKER1/2 SEL, CROSS SET
USER1 BOX1/2 SET, OTHER SET
These can do the memory.
Change to MARKER1 menu.
Change to MARKER2 menu.
Change to CROSS SET menu.
Change to BOX1 SET menu.
Change to BOX2 SET menu.
Change to OTHER SET menu.
OFF It is effective only to install VF-HD500.
OFF It is effective only to install VF-HD500.
Initial
Description
setting
ON Center marker ON and OFF.
ON Safety Maker ON and OFF.
Side 4:3 marker ON and OFF
OFF
Side 13:9 Marker ON and OFF
OFF
Side 14:9 marker ON and OFF
OFF
Side 15:9 marker ON and OFF
OFF
OFF Cross marker ON and OFF.
OFF Box1 marker ON and OFF.
OFF Box2 marker ON and OFF.
Initial
Description
setting
Adjust Vertical line of Cross Marker
horizontally.
Adjust horizontal line of Cross Marker
vertically.
Description