Remote 14 Receptacle Information; Optional 115 Volts Ac Duplex Receptacle And Circuit Breakers - Miller Electric XMT 350 CC/CV Owner's Manual

4-7. Remote 14 Receptacle Information

A J
K K
I I
B B
C L N
N H H
C
M
D G
F
E
*The remaining sockets are not used.

4-8. Optional 115 Volts AC Duplex Receptacle And Circuit Breakers

OM-2247 Page 18
24 VOLTS AC 24 VOLTS AC
115 VOLTS AC 115 VOLTS AC
REMOTE
OUTPUT OUTPUT
CONTROL
A/V A/V
AMPERAGE
VOLTAGE
GND GND
1
Socket* Socket Information
A 24 volts ac. Protected by circuit breaker CB2.
B Contact closure to A completes 24 volts ac
contactor control circuit.
I 115 volts ac. Protected by circuit breaker CB1.
J Contact closure to I completes 115 volts ac
contactor control circuit.
C Output to remote control; 0 to +10 volts dc, +10
volts dc in MIG mode.
D Remote control circuit common.
E 0 to +10 volts dc input command signal from
remote control.
M CC/CV select
F Current feedback; +1 volt dc per 100 amperes.
H Voltage feedback; +1 volt dc per 10 output recep-
tacle volts.
G Circuit common for 24 and 115 volts ac circuits.
K Chassis common.
1 115 V 10 Amp AC Receptacle
Power is shared between duplex
receptacle and Remote 14 recep-
tacle (see Section 4-7).
2 Circuit Breaker CB1
3 Circuit Breaker CB2
CB1 protects duplex receptacle
and 115 volts ac portion of Remote
14 receptacle from overload.
CB2 protects 24 volts ac portion of
Remote
overload.
Press button to reset breaker.
2 3
14 receptacle from
803 691-C