Drive Gear / Cam Gear; Sector Gear; Slider Plate; Tension Lever - Zenith ABV341 Series Service Manual

DECK MECHANISM DISASSEMBLY
Cam Gear Hole(B)
Drive Gear Hole(C)
24. Drive Gear (Fig. A-7-1)/
Cam Gear (Fig. A-7-2)
1) Remove the Washer (W2) and lift the Drive Gear up.
2) Unhook the Hook (H14) of the Cam Gear and lift the Cam
Gear up.
NOTE
When reassembling, align the Drive Gear Hole (A) and the
Cam Gear Hole (B) in a straight line after the Drive Gear
Hole (C) is aligned with the Chassis Hole.
25. Sector Gear (Fig. A-7-3)
1) Unhook the Hook (H15) of the Loading Base on bottom
Chassis and lift the Sector Gear up.
(H14)
Drive Gear Hole(A)
Cam Gear
(Fig. A-7-2)
Washer (W2)
Drive Gear
(Fig. A-7-1)
(H15)
(H16)
Chassis
Fig. A-7
26. Slider Plate (Fig. A-7-4)
1) Lift the Slider Plate up.
27. Tension Lever (Fig. A-7-5)
1) Unhook the (A) portion of the Tension Lever from the
Hook (H16) of the Chassis.
2) Turn the Tension Lever counterclockwise and lift it up.
28. Spring Lever (Fig. A-7-6)
1) Unlock the Locking Tab (L3) from the bottom of the
Chassis and lift the Spring Lever up.
4-9

Sector Gear

(Fig. A-7-3)

Slider Plate

(Fig. A-7-4)
(A)

Tension Lever

(Fig. A-7-5)

Spring Lever

(L3)
(Fig. A-7-6)
Loading Base